Foundation pouring steps for solar street lamp installation

by:Road Smart     2020-03-21
Solar street lamps are energy-saving and easy to install, and have been widely used. The installation of solar street lamps does not need to bury cables underground in advance, thus saving construction costs. However, the Foundation should be poured before the installation of solar street lamps, so that everyone can know more about the relevant knowledge, shenzhen source solar street lamp technicians explain the foundation pouring steps for solar street lamp installation. 1. Determine the position of the vertical lamp: investigate the geological conditions. If the ground surface is 1. 2 meters soft soil, the excavation depth should be deepened; At the same time to confirm excavation location the following no other facilities (Such as cables, pipes, etc) , There is no long-time sunshade object on the top of the street lamp, otherwise it is necessary to change the position properly. 2. Reserve in the position of vertical lamps (Excavation) In accordance with the standard of 1 meter 3 pit, the embedded parts are positioned and poured: the embedded parts are placed in the middle of the square pit, one end of the PVC threading pipe is placed in the middle of the embedded parts, and the other end is placed in the storage of the battery (As shown in the above figure). Pay attention to keep the embedded parts, Foundation and the original ground on the same horizontal plane ( Or the top of the screw is on the same level as the original ground, depending on the needs of the site), One side should be parallel to the road; In this way, it can be ensured that the lamp post is upright and not skewed. Then it is fixed by concrete pouring, and the vibration of the vibrating rod should not be stopped during the pouring process to ensure the overall compactness and firmness. 3. After the construction is completed, clean up the residual sludge on the positioning plate in time, and clean the impurities on The Bolt with waste oil. 4, concrete solidification process, to regularly watering maintenance; When the concrete is completely solidified (Generally more than 72 hours), Can carry on the chandelier installation. The above is about the foundation pouring steps for the installation of solar street lamps. The solar street lamp manufacturers remind that the foundation pouring for the installation of street lamps should be safe so as to ensure the later use.
Technology is a foundational component of today's fast-paced business environment. Socreat Electronics Technology Limited who are digital natives are especially equipped to harness technology's power to establish, promote and grow our businesses.
With all the pros and cons of different in mind, click Road Smart Solar Led Light to learn more about and decide which solar generators for sale option is best for your case.
As the manufacturing procedure of solar power systems prices becomes more regulated, the costs to businesses will increase and the workforce will suffer as a result.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Hi, message received, will get in touch with you soon